Trafol Base oil 46/40 - Base oil produced from mineral oils
Trafolube produces Base Oil 46/40 for industrial use.
The produce is used in hydralics, industry and motor oils as well as numerous other lubricants.
The high naphthene proportion of Trafolube Base Oil 46/40 guarantees an excellent solvent property for additives. Trafolube Base Oil 46/40 is also used for low temperatures and is especially suitable for special applications.
- Characterization: Base oil, produced from mineral oils
- Appearance: yellow-brown fluid, free from solids
- Smell: mild, typical for mineral oil
|Density by 15°C||885||kg/m³||DIN 51 757|
|Color index||3 - 4||DIN ISO 2049|
|Viscosity at 40°C||ca. 46||mm²/s||ISO 3104|
|Pour Point||< -14||°C||DIN ISO 3016|
|Flash point P||> 200°||°C||DIN EN 22719|
|Neutralization number||< 0,03||mg KOH/g||DIN 51 558-1|
|PCA content||< 3||%||BS 2000, IP 346|
Base oil for industrial use in hydralic oils, industrial oils, motor oils and many other lubricants.
The product is stable for an unlimited time and frost resistant in closed original containers. At low temperatures, cloudiness can occur. This can easily be removed with light warming without any reduction in quality.
The information contained in this data sheet is based on our thorough controls and is given to the best of our knowledge. These are for information only for our customers , but does not relieve the customer of a responsible examination of the described products for their suitability for the intended processes and purposes and the eventual risk of violation of rights of third parties. For any potential liability on our side, the conditions of our General Business Terms are valid.